The AlcoMate Pro breathalyzer improves upon the AlcoHawk Pro breathalyzer by taking a deeper lung-air sample (5-sesc), allowing for more precise measurement of blood alcohol concentration (BAC). The AlcoMate Pro breathalyzer uses the same sophisticated alcohol sensing technology as AlcoHawk Pro, but provides a higher level of accuracy and sensitivity expected by the industry professionals and consumers who seek the best in performance and reliability. FlowCheck Technology The AlcoMate Pro alcohol detector now includes innovative FlowCheck technology. An important aspect of breath testing is ensuring that subjects blow a large volume of air through the tester. FlowCheck will verify that enough air has been blown through the AlcoMate Pro breathalyzer before displaying a test result. If the FlowCheck engages and recognizes that not enough air was blown, an error message "ERR" will be displayed and the test should be repeated. Because the AlcoMate Pro alcohol breath tester measures the amount of alcohol in a subject's deep lungs air, a longer breath sample of 5 seconds provides more accurate test results. One-way-Air Flow The AlcoMate Pro features a "one-way-flow" disposable mouthpiece which prevents fresh air inhalation. Negative blow or fresh-air- blow can both severely undermine test accuracy.

The AlcoMate Pro is available in two packages: The Full Kit and the Basic Kit: Full Kit Basic Kit AlcoMate Pro Hard Case Zipper Pouch Car Adaptor 9V Battery 2 Mouthpieces Wrist Strap User's Guide AlcoMate Pro Soft Carry Pouch 2 Mouthpieces Wrist Strap User's Guide

Government approvals DOT / NHTSA and FDA approved Wide Range Wide range of testing, from 0.0% - 0.4%BAC Fast Response Time Short warm up and response time, as well as a fast recovery time between tests. Disposable Mouthpieces Ensure sanitary testing of many subjects with the AlcoMate's disposable mouthpiece system. Audible Alert Audio alert generated when >0.05 %BAC detected. Highly Selective Oxide Sensor The AlcoMate Pro Silicon-features the latest in the silicon-oxide semiconductor sensor technology 5 Sec Blowing Time 5 second blowing time allows for deeper lung samples, ensuring more accurate readings. Ultra Bright Digital Display Easy to operate and read even in low lighting conditions. Sleek Design Attractive design and shock resistant plastic. Specifications Size 120 x 60 x 25 mm Weight 200 grams Housing Shock resistant, molded plastic Sensor Highly selective semi-conductive oxide alcohol sensor Response time 3 sec. Warm up time 20 sec. Recovery time 30 sec. Battery life Over 300 tests Battery type 9V alkaline External power supply 12V DC adapter or a 12V DC /300MA wall power adapter Accuracy ±0.01% at 0.10% BAC ¥±0.05mg/liter at 0.50mg/liter BRAC Detection range 0.00 ~ 0.40% BAC 0.00 ~ 2.00 mg/liter BRAC Calibration BAC simulator (Model 34C/Guth Laboratory, USA) Digital display Ultra bright three digits numeric seven segment display Warranty 1 year